XM200HD uses a dedicated remote control to save images.
If you only want to save images, you can control it externally without using a remote control.
The terminal on the remote control is a ready-made 3-pole stereo mini plug 3.5mm.
It is also easily available on the internet.
No problem even if you disconnect the optional remote control and use it.
If you disconnect the remote control and use it, insert a resistor (30KΩ) between the white wire and yellow wire to short circuit and a static image will be saved. (Make sure the resistance is 30KΩ.)
|
|
XM200HD high performance high definition camera |
