If you don’t mind sacrificing magnification, use a 0.5x auxiliary lens to increase W.D.

 

標準レンズ専用0.5倍補助レンズ TG-0.5   <Example> When a 0.5x auxiliary lens is attached to the TG500PC2, the standard 23x to 140x becomes 11x to 70x, and the standard focal length of 90mm increases. Changes to 160mm.

 

However, in this case, the position of the LED ring light attached to the tip of the lens will be moved away from the object and the light will become dark, so it is necessary to improve the lighting by changing to a higher brightness light or removing the diffuser plate. will become necessary.

 

 

	高輝度80灯LEDリング照明 GR-80N2
	With removable diffuser plate

 

 

It is possible to change the position of the lighting using the LED angle, but this will interfere with the extended W.D., so use twin arm lighting (SPF-D2), LED spot lighting (SPF-FL3), etc. We recommend.

 

 

	Even though I used a 0.5x auxiliary lens to extend the W.D. If you lower the position of the lighting using an LED angle This will interfere with the W.D. that you have worked so hard to develop.
Therefore, we recommend using twin arm lighting (SPF-D2), LED spot lighting (SPF-FL3), etc.
	ツインアームLED照明　SPF-D2   Stationary type dimmable LED twin arm lighting.

Please contact technical support for details.