Can you do this at this amazing price?
Zoom microscope with a lock-free arm to rid you of annoying locks
●No annoying locks! Smooth operation to improve work efficiency
●Stereomicroscope with arm that can be freely angled up, down, left and right
●Working distance 97mm
●7x to 30x zoom lens
※Light is optional.
There is no troublesome lock, allowing smooth operation to improve work efficiency!
Conventional microscope arms have
locks on each joint.
You have to tighten these locks
every time you set a new position.
This model does not have a lock on each joint.
When you release your hand in any position,
the arm will stop in place.
Work efficiency is greatly
improved by smooth operation.
US patent obtained!
AFN-405 stays in any position
in space due to mechanical balance
(US patent obtained)
Just hold the horizontal short arm
part (arrow part) by hand and change
It stretches smoothly and stops immediately.
It rotates and saves quickly.
It allows comfortable operation!
It can stay mechanically stationary in any position.
Smooth arm that can be freely angled up, down, left and rightム
You can move the microscope head by 90 °
from horizontal position to upward position
and by 30 ° from horizontal position to
Each joint can rotate by 360°.
The arm can be moved from the 90° position to the 25° position.
Mounted on the edge of a workbench
It can be attached to the edge
of a workbench with a clamp (vise).
(Clamp is standard equipment)
Maximum clamping width: 65 mm
Actual operation video
Model Number AFN-405 Magnification 7x-30x Eyepiece Lens 0.7x-3x Objective Lens 10x Field Number 20 Interpupillary Distance 52～75mm Lens Barrel Binocular head Inclination angle 45° Weight 5.5kg Observation distance 97mm Height (when stored) 560mm Load capacity * Mechanically required weight 1～4kg
Introduction of useful options
Auxiliary lens that reduces the magnification but allows you to extend the working distance when required
0.5x auxiliary lens NSZ-0.5
0.75x auxiliary lens NSZ-0.75
By attaching an auxiliary lens, you can reduce the magnification and extend the working distance.
0.5x auxiliary lens
Magnification: 3.5x to 15x
Working distance: 180 mm
0.75x auxiliary lens
Magnification: 5.25x to 22.5x
Working distance: 120 mm
Working distance when using an auxiliary lens
Specialized option to observe with brighter lighting
LED ring light
Attach the 56 LED ring light to the tip of the objective lens.
The double-line 56 LED light provides
・Double-line 56 LED ring light
・Accept 100-240V power supply and can be used overseas
Ideal for protection against dust, etc.
Adapter with protective filter for AFN-405 (W)
Colorless and transparent protective filter,
ideal for protection against dust.
※Auxiliary lenses cannot be used when a protective filter is attached.
LED ring light can be installed.
Attach to the tip of the objective lens
Specialized option for when there is no space on the desk or shelf to hold the vise
[Grommet to be attached to workbench / desk]
Desk grommet mount
Make a hole of about Φ10mm in the top plate
or shelf of the desk, and pass it through
the Φ10mm hole with the screw part of the
grommet from above.
Insert the main arm into the grommet mount fixed to a desk.
Optional Parts if you want to install it on an optical laboratory table.
[M6-25mm matrix optical laboratory table flange]
Optical laboratory table flange
There are screw holes for attachment to the M6-25mm matrix optical laboratory table.
Option to fix the arm to a shelf and lower the microscope
By installing this instead of the horizontal arm of the standard arm, you can move the microscope below the mounting shelf.
The smooth arm can be installed not only on the edge of a desk but also on a shelf.
It can be folded into a compact shape when not in use.
Specialized option to mount the microscope on a shelf
Wall mount bracket for AFN series
A bracket for mounting the smooth arm directly on the wall. You can use the smooth arm in a small space by rotating it to the left.
Save even more space by using it in combination with Smooth Spin!